Narrow Gauge North

2027

Exhibitors : Previous

Port Maud

A layout by Derek Naylor
Scale 1:160
Gauge 9mm

The model is inspired by a small Cornish style harbour, and after 70 years of modelling, something a bit different.

The boats are resin hulls with details added using plasticard. The harbour walls are also plasticard, and the “baseboard” is a garden potting tray, thus items in contact with water are waterproof. The cable hauled tram is a simple added working item. The shops and houses are inexpensive resin properties.

I must be the only exhibitor who brings 12 pints of green water to a show. The tide ebbs and flows a bit fast, but any slower, it would be more interesting to watch paint dry!

 

 

Porthladd Fechan

A 009 layout by Dave Lowe
Scale 009 (4mm/1ft)
Gauge 9mm
Size 9’ x 4’

 

Porthladd Fechan (SmallHarbour) is situated in North West Wales and represents a small station serving what were originally two different railway lines that have since merged. The majority of the traffic now consists of passengers, with a variety of freight operated to supplement the declining slate trade. Due to differences in the loading gauges of the two railways, occasional trains still need to change engines at Porthladd Fechan. The majority of the locomotive stock is based on that of the Ffestiniog and original Welsh Highland Railways, although a number of other types can be seen, both freelance and prototypical.

 

Purbeck

A 009 layout by John Thorne 
Scale 4mm/1ft
Gauge 9mm
Size 11’ x 1’8”
Purbeck is set in the 1950’s and assumes that the industrial lines on the Isle of Purbeck were extended to not only carry the ball clay, but to include a passenger and local freight service.  These trains ran into a station located at Corfe.  From the station a line extends through the Dorset countryside, covered in the local gorse, into the works of the Purbeck Clay Company.
The layout is not intended to be a model of the actual industrial lines that existed, but illustrates the ball clay industry, with weathering beds, a drag liner, and a clay processing works.  To give the layout a prototypical feel, various original buildings have been modeled, and also scratch built models of the original Lewin and Manning Wardle locos can be seen working the clay trains.
Also modeled is the original school wagon which daily transported schoolchildren from Goathorn to Norden (Corfe).
The station area consists of a small station building, goods shed and loco shed, and outside the station is parked a local bus belonging to the Hants and Dorset Bus Company.
The layout uses PECO track and pointwork, all buildings and stock are scratch built, and the layout also features working lighting. The main lighting can be dimmed, so that the yard lights and building lights illuminate the layout.
Other features include
  • Working loco turntable.
  • Motorized wagon turntable in the clay works.
  • Motorized yard crane in the goods yard.
  • Motorized drag liner
  • Buildings with fitted interiors.

 

Racoon Canyon Mining

A 0n30 layout by Tony Kell
Scale 0n30

Size 12’ x 3’6"

Some time ago I got the On30 bug. I'm still not cured and so as a form of therapy I have built this layout which is loosely based on American prototype, set high in the mountains, where the Arithmetic Either Ore is mined. This is sent to "Algebra" down in the valley, along the narrow gauge line, where it is worked out. In addition to this, NO...no more mathematical puns! Enough!

Unfortunately the bears seem to have eaten all the Racoons, as I don't see any left in the hills around the mine, but there are a number of other critters scuttling about the place.

The layout is operated with a Lenz DCC system, and many of the locos have "on board" sound systems...chuff chuff chuff, clang, clang...you get the picture.

The track is PECO 7mm narrow gauge track painted and weathered to make it look old. The mountains are made of polyurethane foam boars cut with a carving knife, and coated with Artex prior to painting with emulsion paint.

Some of the buildings are American laser cut wooden kits

 

Redwood Lumber Company

An On30 layout by Kevin Hughes
Scale 7mm/1ft
Gauge 16.5mm
Size 10' x 2'
 

Situated in north west California during the 1950’s, Redwood Lumber Company portrays a small logging and lumber line, of which there were several during this time.

Locomotives and rolling stock were sometimes purchased second hand from other companies, hence the various road names.

The line interchanges cars with another narrow gauge railroad, namely the South Pacific Coast.

Shay’s and Climaxes are the principal loco’s, which along with the rolling stock, are all from Bachmann – tracks and points are PECO,

The Engine house, sawmill and water tower are scratch built from balsa strip.  Scenic materials are from Woodland Scenics and the ballast is sand.  Trees are shaped and stained balsa trunks, with foliage of conifer green.  The back scene uses emulsion paint for the sky, pastel chalk for the clouds, and Humbrol matt enamels for the distant trees and mountains,

The layout is operated in DC mode, and was featured in the March 2007 issue of Continental Modeller.

Photographs reproduced with the kind permission of Steve Flint, Peco Publications