Exhibitors : Previous
White Hill Cement Works
An 0.14/0.16.5 Layout by Mark Hesketh
Size 8' x 3'
White Hill is is based on one of the small cement works that once flourished in the Adur Valley in West Sussex, but have sadly, long since closed.
It represents a typical cement works that was part of a much larger system with all of the various works inter-connected by means of a narrow gauge railway system. The scene is set in the late 1960's when operations were being run down and there was a general air of dereliction about the place, this should be fairly evident in some of the accompanying photographs.
The layout has been modelled in "O" narrow gauge (7mm = 1 foot) and is somewhat unusual in the fact that it is has two entirely separate narrow gauge railway systems, the 2'4" gauge (0-16.5mm) line or as it is more affectionately referred to as,the standard gauge and the 2' gauge (014mm) line. The 2'4" line links White Hill Cement Works to the one at Upper Beeding, further down the line and nearer the coast where there is also a transfer connection onto the rest of the main railway network. Although the odd hopper train can sometimes be seen trundling back and forth, this line is primarily responsible for delivering various assorted raw materials and supplies to the works, plus not forgetting of course, the small compliment of employees to their place of work.
The 2' line heads North to Golding Barn and then onto Small Dole and is used primarily for bringing in supplies of essential raw materials such as chalk and limestone from the quarries nearby. Trains of rugga skips can be seen trundling back and forth with astonishing regularity with the occasional works and supply trains adding a little variety to the traffic.
The service operated is far more intensive than the average full sized railway, which is perhaps why the workers appear so disgruntled.
The 2' line also has the added interest of full loco repair and re-fueling facilities, at the centre of which is a small but fully functional miniature turntable. The little diesels can often be seen entering the loco facilities for Jim the mechanic to try and stem yet another oil leak on these ageing workhorses.
Further information can be found on the White Hill Cement Works web site.
https://mail.narrowgaugenorth.org.uk/index.php/traders/confirmed/85-public-news/exhibitors-previous?start=200#sigProId2102579d61
Wibsey Wagon Works
A O.16.5 layout by The 7mm Narrow Gauge Association - Yorkshire Group
Scale 7mm
Gauge 16.5mm
Size 4’ x 2’3"
Wibsey Wagon Works
Wibsey Wagon Works
Winter Overcotes
Winter Overcotes is the interchange between the East Barsetshire Light Railway and the Great Western main line to Barchester. It is set just after Nationalisation, in the early 1950’s. Although freelance, the model is based on the Welshpool and Llanfair Light Railway.
-
Winter Overcotes
Winter Overcotes
-
Winter Overcotes
Winter Overcotes
-
Winter Overcotes
Winter Overcotes
https://mail.narrowgaugenorth.org.uk/index.php/traders/confirmed/85-public-news/exhibitors-previous?start=200#sigProId00587f3490
Withens
A O-16.5 Scale layout by D Butcher
Wood Brook
| By | Paul Titmuss |
| Scale | 4mm |
| Gauge | 12mm |
| Size | 7'4" x 1' |
Wood Brook is a fictional location modelled in 4mm scale using 12mm gauge track representing a 3’ gauge line.
The layout has been built in three sections, each 755mm x 254mm, a size dictated by what will fit on top of a half-height Billy bookcase from IKEA.
The track used is PECO 12mm gauge H0m just the correct width for 3’ gauge with no compromises.
The majority of stock used with this layout is accessible by the enthusiastic model builder. The loco’s are 3D prints from Model Engine Works, all of which run on Halling motor bogies. The wagons are a mixture of plastic kits (Dundas Models) and white metal or white metal and resin kits (Branchlines). Only the coaches are built from etched brass.
The buildings are all made from card with mortar courses embossed and then the whole structure was painted and weathered.
The backstory (if you need one). The station site has been developed by enthusiasts as a museum for 3’ gauge locos and stock. Their ambition is to extend the line further but for the time being they are restricted to the station vicinity running short passenger and demonstration goods trains.
In reality I needed to check out a few ideas before commencing my next 00n3 layout (Clogher) and produce something practical for show at a one day exhibition.
https://mail.narrowgaugenorth.org.uk/index.php/traders/confirmed/85-public-news/exhibitors-previous?start=200#sigProIda464d3846b
Wood End
A 009 layout by Stephen Penn
Scale 009 (4mm/1ft)
Gauge 9mm
Size 6’ x 2’6"
An end-to-end Narrow Gauge railway in 4mm scale - 9mm gauge.
https://mail.narrowgaugenorth.org.uk/index.php/traders/confirmed/85-public-news/exhibitors-previous?start=200#sigProIdf2a08e7ee2