It had long been known that a good granite outcrop existed in the hills above Stamley, but with no proper transport it could only be worked in a small way for local use. The coming of the Roth Valley Tramway’s Ramton extension changed this and a short branch line was soon put in from Stamley station. Great things were expected, but with the First World War draining off the quarrymen, then the great depression, somehow the quarry never really seemed to get going.
By the period of the model, around 1935, only small amounts of road stone and paving stones are being produced. Short trains, often mixed, bring up the empty wagons and remove loaded ones, with the odd van or two for the mill behind the station.
Buses now run right up to High Stamley Village, about half a mile further along the valley, so few passengers bother with the train. Lorries too can be seen in the valley; it looks like time is almost up for this little branch line. It will carry on for now, so you can watch the odd wagons going to and fro up the steep incline to the quarry, whilst small trains continue up and down the valley to the main line. Don’t leave it too long – soon it will be silent as the quarry company has ordered a lorry!
When the line’s own Peckett 0-6-0ST is unavailable, trains are worked by locos belonging to the RVT, No.2 an ancient Hudswell Clark 0-6-0T or No. 8, a Hunslet 0-4-2T are the usual visitors. A bigger Hunslet 0-6-2T No.12 appears on occasions.
The Quarry Company usually uses a Kerr-Stuart 0-6-0T. An elderly Bagnall 2-4-0T sometimes takes a turn struggling up the bank and almost sliding back down with full wagons.
The only stock owned by the line is an ancient six wheeled coach and a small brake van. All other stock belongs to the RVT and has been seen on the other sections of the RVT previously exhibited.
The layout will also be appearing at the following shows :-
| York | York Model Railway Show | 19-21/02/14 |
-
High Stamley
High Stamley
-
High Stamley
High Stamley
-
High Stamley
High Stamley
-
High Stamley
High Stamley
https://mail.narrowgaugenorth.org.uk/index.php/85-public-news/exhibitors-previous?start=80#sigProIde900b246d9
This is the second real water model I have made. The first was a Cornish style harbour in which the tide ebbed and flowed. Pretty simple. The lock proved.more of a challenge. . In the main is is constructed from plasticard. It is a freelance model of a narrow canal. I had looked at a broad canal but the narrow canal was simpler in so much as I could get away with single gates at each end of the lock. It's about the largest size I felt I could make a portable model. The scale is 1/96th (1/8 inch to the foot). The three narrow boats are also scratch built. They are to small, for me anyway, to fit motors which would also entail radio control. Instead they are propelled by a "twizzle" stick.
Questions are welcome.
-
Hirstwood Lock No.19
Hirstwood Lock No.19
-
Hirstwood Lock No.19
Hirstwood Lock No.19
-
Hirstwood Lock No.19
Hirstwood Lock No.19
-
Hirstwood Lock No.19
Hirstwood Lock No.19
-
Hirstwood Lock No.19
Hirstwood Lock No.19
https://mail.narrowgaugenorth.org.uk/index.php/85-public-news/exhibitors-previous?start=80#sigProIdb2e96295d5
The Crummack Valley Railway is a fictional light railway somewhere in England, that winds its way up a valley. The railway is essentially a farmers line bringing in coal, farm feeds and materials, as well as serving a quarry. Sheep, cattle, timber and quarry products are taken down the valley. The railway also connects with a canal. Passengers are catered for on occasional mixed trains, with extra trains on market days, down the valley, and at weekends.
The operators are members of the 009 Society which caters for small scale narrow gauge modellers. We will be happy to answer any questions regarding the Society, the layout, the scenic and 009 modelling.
-
Crummack Valley layout plan
Crummack Valley layout plan
-
Crummack Valley
Crummack Valley
-
Crummack Valley
Crummack Valley
-
Crummack Valley
Crummack Valley
https://mail.narrowgaugenorth.org.uk/index.php/85-public-news/exhibitors-previous?start=80#sigProId476f343a6d
A layout by Derek Naylor
Scale 1:160
Gauge 9mm
The model is inspired by a small Cornish style harbour, and after 70 years of modelling, something a bit different.
The boats are resin hulls with details added using plasticard. The harbour walls are also plasticard, and the “baseboard” is a garden potting tray, thus items in contact with water are waterproof. The cable hauled tram is a simple added working item. The shops and houses are inexpensive resin properties.
I must be the only exhibitor who brings 12 pints of green water to a show. The tide ebbs and flows a bit fast, but any slower, it would be more interesting to watch paint dry!
https://mail.narrowgaugenorth.org.uk/index.php/85-public-news/exhibitors-previous?start=80#sigProIda08648339c