A Gn15 layout by Simon Dawson
Gauge 16.5mm
An O16.5 layout by Mark Surr
Scale O16.5 (7mm/1ft)
Gauge 16.5mm
Size 7’ x 18"
Arfer Yard is a 7mm narrow gauge layout based on an industrial yard just outside a small rural town in the late 1950s. The small locos move goods in and out of the yard which has an agricultural supplier, a joinery business and some general warehousing. The locos and rolling stock are kit built and the buildings are all scratch built.
If you have any inquiries please ask as we love to talk about trains.
https://www.narrowgaugenorth.org.uk/index.php/85-public-news/exhibitors-previous?start=164#sigProId69c6c1cb19
A 009 layout by Hugh Milward
Scale 009 (4mm/1ft)
Gauge 9mm
Size 70cm x 90cm
My last layout was a fiddle yard to industrial sidings, and so for this layout I wanted a continuous circuit so that at exhibitions I could watch the trains go round and round.
The layout is nearing completion with just some more details to add.
Layout Size
The Layout measures 70cm x 90cm and is free standing on its own legs. The layout height has been deliberately set at a height of 1 metre and 30cm so that it can be viewed through the bridges.
Access is required around one side so that the Operator can view and control the low level section of the layout from the front.
Theme
The layout is intended to be a narrow gauge line in an industrial setting, with a canal, factories, tight curves and short sidings. The canal is dirty and run down and is crossed by five bridges carrying tracks to the factories hence the name.
The period is set in the 1930’s – 1940’s
Track Work
Track work is all hand built using Peco 75 code rail and copper clad sleepers, including a three-way point. The points are operated by “Ceep” point motors.
There is a short section of dual gauge track work where the standard gauge comes in to the quay side. This is to EM gauge.
Baseboard Construction
The baseboard is open plan 6mm ply, topped with Sundeala. There is a small “Fiddle Yard” loop at the rear of the layout.
The Layout size was dictated by the boot of my car and the cupboard where I store the layout when not in use.
Scenery
The back scene and buildings are made from “Wills” plastic sheet and buildings which have been heavily adapted.
Stock
Stock is a mixture of kit build and scratch built engines and wagons.
https://www.narrowgaugenorth.org.uk/index.php/85-public-news/exhibitors-previous?start=164#sigProId640861f6d5
A HOe layout by Andrew Jeffcock
Scale HOe (1:87)
Gauge 9mm
Size 12’ x 2’6"
I chose this layout name almost in a moment of panic. Having said that I would like to display a layout at my local club’s (New Mills & District Railway Modellers) exhibition in 2017 I was asked what it was called. I realised that I had no name for it!
Knowing a small amount of German, on the spur of the moment I chose “Die Keinnamebahn” – “the railway without a name”. From this name I was able to make a ‘history’ for the line.
The railway is set in the Alsace area of France/Germany, allowing me to choose from a mixture of French and German features. The line would primarily carry cement, fuel oil and timber from the port at Keinname and traffic from the ferry. The main loco type I use is the excellent Roco Hf110 tender and tank locos with roling stock by Bemo, Liliput and Roco.
Further information is available on Andrews website - narrowgauge.retiarius.com
-
Die Keinnamebahn
Die Keinnamebahn
-
Die Keinnamebahn
Die Keinnamebahn
-
Die Keinnamebahn
Die Keinnamebahn
-
Die Keinnamebahn
Die Keinnamebahn
-
Die Keinnamebahn
Die Keinnamebahn
-
Die Keinnamebahn
Die Keinnamebahn
https://www.narrowgaugenorth.org.uk/index.php/85-public-news/exhibitors-previous?start=164#sigProId27f651a98b