A 009 layout by Charles Insley
Scale 009 (4mm/1ft)
Gauge 9mm
Size 5’ x 4’
St Etienne-en-Caux is at the heart of the Tramways de Caux, a 60cm railway system set in the Pays de Caux in eastern Normandy. The railway was built in the late 1890’s, following the successful demonstration of 60cm railways by Paul Decauville at the Paris Exposition in 1889. The railway was built as a common carrier, carrying both freight (largely agricultural produce, sugar beet and stone) and passengers. The Tramways, unlike its neighbour to the west, the Chemins de fer du Calvados, managed to weather the Second World War and staggered into the 1950’s, largely kept going by the use of cheap autorails (railcars) and its stone traffic, with a seasonal tourist traffic in the summer months.
The model, although freelance, is based on a number of norther France narrow gauge railways, in particular the CF du Calvados, the CF Froissy-Cappy-Dompierre and the Tramways de Pithiviers a Toury. The station at St Etienne Quai is based on the harbour side station at St Valery on the metre gauge CF de la Baie de Somme. Althought the Calvados system is now closed; happily the other three lines are still with us and well worth a visit. The model is set in the late 1950’s.
A layout by Graham Ash
Scale Fn3
Gauge 45mm
Size 16’ x 12’
I have been building the above layout for the last 2 years.
The layout which is built against a fictional logging railroad is part of a complete layout which fits into my garage at home.
This layout shows loggers life in the outback, showing a log loading scene, movement of loaded and unloaded logging skeletals and disconnects.
It shows most of the differing types of logging locos employed to move these dangerous log cargoes around.
Also shows a trestle bridge, over a ravine area.
Also a log camp area, showing loggers and their wives
The layout is built on 4 layout boards; each measuring 4ft x 2 ft, these form the public show front of the layout. Additionally a further 2 – 4ft x 2 ft boards make up a behind scenes fiddle yard.
The layout is built on traditional terms of why pay when it’s for free.
The track is all hand laid as are the points which are home made.
The track is all Peco Code 200 and the same track is used to make the points up. The points are powered using a Lenz unit and Tortoise power motors
The layout is powered by a Lenz 100 Digital set, which not only powers the locos, but also powers the points via a Lenz points unit.
All the locos on this display are powered by DCC, therefore each loco has its own DCC decoder fitted, some are fitted with additional sound units, these are expensive but sound fabulous.
Eventually this layout will be increased in size to have a Sawmill, proper logging area, a town and outbound goods. When finished the complete layout will measure 17ft x 12 ft – and will have a continuous run around
A 009 layout by Stephen Penn
Scale 009 (4mm/1ft)
Gauge 9mm
Size 6’ x 2’6"
An end-to-end Narrow Gauge railway in 4mm scale - 9mm gauge.
https://mail.narrowgaugenorth.org.uk/index.php/85-public-news/exhibitors-previous?start=112#sigProIdf2a08e7ee2
A On30 layout by Harvey Faulkner-Aston
Scale On30
Gauge 16.5mm
Size 4’2" x 1’8"
The setting is the Pacific Northwest where the redwood is king. The scene depicts the backwoods engine facility for the Marten’s Pine logging operation. The layout features Shay and Climax type locomotives from Bachmman and scratch-built freight cars based on the Mich-Cal Logging lines. All structures on the layout are scratch-built from strip timber.
https://mail.narrowgaugenorth.org.uk/index.php/85-public-news/exhibitors-previous?start=112#sigProId068f44f2a4